Welcome, Guest
Username: Password: Remember me

TOPIC: CL-44 from Garry Russell

CL-44 from Garry Russell 4 years 4 months ago #35452

  • hurricanemk1c
  • hurricanemk1c's Avatar
  • Offline
  • Posts: 43
Hi all!

Here's some shots from my first flight in the pre-release CL-44, modelled by Garry Russell and Fraser McKay. It's a fantastic little model (with a take-off weight of 210,000lbs! Yeah, right!), with lots of little things! I must stress at this point it is WIP, certain things may not be right and it's currently not for general release.

Built for FS9, it's reported that it works OK in FSX, just don't quote me on that! I had to try it out after Leif Harding, now a firm friend, invited me to try it out

So, here we are on the ramp at EGNX - engines running as I haven't read the manual yet!



The superb 2-D panel

An EE Lightning

A Volga-Dneper An-124-100

Just waiting for this 737-400 to take off

Lined up

She just lifted herself off the ground very gracefully!

Gear up! This retraction is very good, as the mains rotate so they face down, then swing back. The left side (from the cockpit) raises before the right

Banking around

Abeam the airfield

Gear down - another interesting set, as the mains practically come all the way down before the front leg comes out!



Full reverse and brakes

Taxiing back in

Our parking spot is where the '124's park - well the one's I've seen there anyway!

Front door open with the engines shut down

Tail open

The Ground Engineer standing in the cockpit

One final look

Thanks for viewing!

The administrator has disabled public write access.

Re: CL-44 from Garry Russell 4 years 4 months ago #35455

  • Garry Russell
  • Garry Russell's Avatar
  • Offline
  • Posts: 2496
Nice shots :woohoo:

Thanks for that Kieran :)

The administrator has disabled public write access.